18" Laser Level
2
For technical questions call: 1-800-665-8685
8347023
V 1.51
OPERATION
BUBBLE LEVELLING
1. Take laser level and rotary base out of box.
2. Firm level on rotary base, and adjust three screws on base until both bubbles are exact in the centre.
HORIZONTAL AND VERTICAL DIRECTION
Turn switch on, a horizontal laser beam is projected. When rotating the base, the laser beam will scan through 360°
in horizontal direction. If a vertical laser beam or laser line is required, insert the prism into the hole.
A compact tripod can be used, which is specially designed for laser level with rotary base. The tripod is made of
anodized aluminium, and the opened length of which is 108 cm, whereas the closed length is 40 cm.
BATTERY REPLACEMENT
The battery must be replaced when the laser beam become dim or the light spot becomes larger or smaller. Take off
the cover on the end of laser level where the switch is installed, and replace two used batteries (1.5V). Make sure
that the positive and negative terminal of the batteries are in place.
CARE AND MAINTENANCE
• Laser tools must be handled with care; avoid shock, vibrations and extreme heat
• Avoid moisture which could obstruct the lens. If needed, use a soft cloth or cotton swab and glass cleaner
to clean the lens.
CAUTION: Before cleaning the lens remove the batteries to prevent the possibility of the laser beam
contacting your eyes.
• Keep the Laser Line dry and clean
• Check batteries regularly to avoid deterioration.
• Remove batteries if the Laser Line is to be stored for an extended period of time
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
APPLICATIONS
Accurate height gauging,
alignment of ceilings,
electrical plugs,etc.
Leveling of
floors,stairs,slopes,etc
Generating a vertical reference
plane, e.g. Positioning of
partitions,etc.
Marking of drill holes, anchor
holes, for series installations,etc.
