background image

User Manual

8238438

V 2.1

2 in. LED  

Vacuum/Boost  

Gauge

Please read and understand all instructions before use.

SPECIFICATIONS

Indicator Range

-30 in. Hg to +30 PSI

Display Diameter

2 in.

Voltage Rating

12V

Material

Aluminum housing

SAFETY

IMPORTANT SAFETY PRECAUTIONS

WARNING! Read and understand all instructions before using this tool. The operator 

must follow basic precautions to reduce the risk of personal injury and/or damage to the 

equipment. Before allowing someone else to use this tool, make sure they are aware of all 

safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual 

cannot cover all possible conditions and situations that may occur. Common sense and 

caution are factors that cannot be built into this product, but must be supplied by the 

operator.
NOTE: 
Keep this manual for safety warnings, precautions, operating, inspection and 

maintenance instructions. 

WORK AREA

1. Operate in a safe work environment. Keep your work area clean and well lit.

2. Do not use in the presence of flammable gases or liquids.

3. Keep anyone not wearing the appropriate safety equipment away from the work area. 

Содержание 8238438









Отзывы: