Operating Instructions
Slicer-Operating Instructions
Before using the slicer for the first time please make sure to read carefully and understand these
operating instructions and the safety precautions. Retain this manual for future reference.
Proper use
This device is intended exclusively for slicing household foods. The food to be sliced must be thawed,
unpacked and free from bones before it can be sliced in the device.
Any other use or modification to the equipment shall be considered as improper use and could result in
damage and/or injury.
Features
1. Housing
2. Switch
3. Cutting blade
4. Sliding feed table
5. Piece holder
6. Plug
7. Knob for slice thickness
8. Food support plate
Technical information
t
Important safety rules
1. The slicer must be connected to a 110V AC electricity supply only.
2. Always pull the plug out of the socket before you clean the slicer or if it is not running properly.
To disconnect the device from the electricity supply, never pull the plug out using the cord,
always pull directly on the plug.
3. NEVER immerse the slicer in water and do not expose the slicer to rain or moisture .If the slicer
should fall into water unplug immediately, and only then remove the slicer from the water.
Afterwards, have the slicer examined by an authorized service center before you use it again.
4. Do not use the slicer if your hands are wet or if you are standing on a wet floor.
Do not use the slicer if it is wet or moist .
5. The slicer is designed exclusively for domestic use and not for commercial purposes.
6. Set up and store the slicer out of reach of children.
7. Do not leave the slicer unattended if it can be switched on and operated.
Nominal voltage
110V~ 60Hz, KB10 min;
Power rating
130W
Cutting blade
Reinforced, non-rusting fine blade, 19 cm
Page 2