Power Fist 8091001, Руководство пользователя

Страница: 9 / 24

6 pc Air Hammer Kit
Visit www.princessauto.com for more information 9
8091001 V 3.03
Problems Possible Causes Suggested Solutions
Tools will not run.
Air flows freely
from exhaust.
O-rings throttle valve dislodged from
seat inlet valve.
Contact Princess Auto Ltd. for a
solution. If unable to do so, have
a qualified technician service
the tool.
Damage or excessive wearing of
internal parts.
Piston is jammed. 1. Remove chisel and
spring retainer.
2. Push punch through hole in
the cylinder until resting against
the piston.
3. Sharply strike punch with a
hammer to loosen piston.
4. If still jammed, disassemble
barrel from housing and use
punch to push piston through the
rear of barrel.
5. Clean the barrel and piston and
remove any rust.
6. Reassemble.
7. If unable to free piston, contact
Princess Auto for a solution.
Tool will not shut off. O-rings throttle valve dislodged from
seat inlet valve.
Contact Princess Auto Ltd. for a
solution. If unable to do so, have
a qualified technician service
the tool.
Loss of power or
erratic performance.
Excessive drain on the airline.
Incorrect size or type of
hose connectors.
Check the airline and confirm
the hose fitting is correct for the
inlet bushing.
Moisture or restriction in the
airline/tank
Depressurize system and drain
tank and airline of water.
Air compressor has insufficient flow. Ensure tool is connected to a
compressor with a rate flow that
matches the tool.