11. Do not over reach. Avoid awkward postures. Ensure that you are
standing securely and keep your balance at all times.
12. Maintain tools with care. Keep tools clean and sharp in order to
have them ready for operation. Follow the maintenance schedules
and instructions for tool changes. Check the plug and cable
regularly, and if these are damaged have them replaced by an
electrician.
13. Keep tools unplugged when not in use.
14. Remove tool keys. Before switching tools on, check that keys and
setting tools have been removed.
15. Avoid unintentional operation or start up of the device. Do not
place your finger on the switch when carrying tools. Make sure
that the switch has been switched off before connecting to a
power supply.
16. Always pay attention. Observe your work. Proceed sensibly. Do
not use the drill if you are tired.
17. Check your drill for damage. Before use, inspect the drill to
ensure all parts and protective devices are working properly.
Check whether the function of moving parts is in order, whether
they stick and whether parts are damaged. All the parts must be
correctly assembled in order to guarantee problem-free operation
of the drill.
18. Damaged protective devices and parts should be properly repaired
or replaced by a qualified service technician, unless otherwise
indicated in the operating instructions. Damaged switches must
also be replaced. Never use tools which can not be turned on or
off with the switch.
19. Use only accessories and additional devices which are specified in
the operating instructions or are recommended by the tool
manufacturer. The use of any insert tools or accessories other than
those recommended in the operating instructions may create a risk
of injury.
