Operation Instructions
Warning!
The voltage specifications on the rating plate must
correspond with the supply voltage. If the shear motor is stalled or
any other function failure, please unplug shear immediately.
Function
The shear is designed for cutting sheet metal. It is a hand held cutting
tool.
Switch Operation
Turn on or turn off the tool by squeezing or releasing the switch
trigger. For continuous operation just press the “lock-on” button on
the left side of the handle.
Maintenance
Warning!
It is recommended that all repairs or replacement of parts
shall only be performed by a qualified service technician.
Warning!
Before cleaning or performing any maintenance, the power
supply shall be disconnected from the tool.
Keep the shear clean at all times.
Never use any caustic agents to clean the plastic parts.
Check the carbon brushes in the event of excessive sparkling
