IntroductIon
This hand operated pump is suitable for pumping out petroleum products and oils from drums.
Its lightweight
construction facilitates installation and operation. The pump is designed for easily transferring fuel.
SpecIfIcatIonS
Rated capacity :
0.33 litres per revolution
Revolutions for 1 litre : 3 revolutions
Average flow rate :
6 gallons per minute
Important Safety precautIonS
WARNING! Read and understand all instructions before using this tool. Keep this
manual for the safety warnings and precautions, operating, inspection and maintenance
instructions. When using this tool, basic precautions should always be followed to reduce
the risk of personal injury and/or damage to the equipment.
WORK AREA
1. Keep your work area clean and well lit.
Cluttered and dark areas invite accidents.
2. Keep children, bystanders and visitors away from the work area.
Do not let them handle tools
or extension cords. No one should be in the work area if they are not wearing suitable protective
equipment.
SERvIcE
1. check for damaged parts.
Before using any tool, any part that appears to be damaged should be
carefully checked to determine that it will operate properly and perform its intended functions. Check
for alignment and binding of moving parts, for broken parts or mounting fixtures, or for any other
condition
that may affect proper operation. Any part that is damaged should be properly repaired or replaced by
a qualified technician.
2. When servicing, use only identical replacement parts.
Only use accessories intended for use with
this tool. Replace damaged parts immediately.
TOOl uSE ANd cARE
1. use the right tool for the job.
Do not attempt to force a small tool or attachment to do the work of a
larger industrial tool. The tool will perform better and safer at the task for which it was intended. Do not
modify this tool or use for a purpose for which it was not designed.
operatIon
1. do not use for pumping chemicals that are liable to corrode metals.
2. To ensure a tight seal, wrap the threads with threaded tape before assembly.
Tighten securely.
3. Before operation, add a tiny amount of oil to the pump body and rotate the handle to distribute
the oil.
4. After operation, add some oil to the pump for lubrication.
For any technical questions, please call 1-800-665-8685
8003174
rotary Barrel
pump
