III. ADJUSTMENT
1. Table Adjustment
A. Height Adjustment
To adjust up or down, loosen
the clamp bolt then adjust the
table to your desired position
by turning the table bracket
handle.
B. Tilting Adjustment:
Loosen the table bevel lock
bolt with adjustable wrench.
Tilt table to desired angle and
retighten the bolt.
C. Swing 360°
Loosen clamp bolt then swing
table to appropriate position
and retighten clamp bolt.
2. Feed Depth Adjustment
Depth Control scale sleeve
type.
Loosen the clamp bolt and
move to the desired depth
then retighten the clamp bolt.
3. Speed Adjustment
• Open the pulley case and
loosen the belt tension lock
handle.
• Choose speed for drilling
operation and move belt to
correct position for desired
speed.
• Push motor backward until
moderate belt tension is
acquired. Then retighten
the lock handle again.
–4–
