12 ft x 1-1/16" Ratchet Strap Hoist
3
For technical questions call: 1-800-665-8685
1580869
V 2.0
UNPACKING
1. Carefully remove the parts and accessories from the box.
2. Make sure that all items listed in the parts lists are included.
3. Inspect the parts carefully to make sure the tool was not damaged while shipping.
4. Do not discard the packaging material until you have carefully inspected and satisfactorily operated the tool.
OPERATION
TO EXTEND WEBBING
1. Secure the hooks and pulley to a rigid anchor. Depress
the switch of the drive pawl in the position
shown as Detail A.
2. Depress the stop pawl in the direction of the arrow
at Detail B.
3. At the same time, pull the webbing until the desired
slack is obtained.
TO RAISE LOAD OR APPLY TENSION
1. Engage the drive pawl and ratchet wheel. The position of
the switch is shown as Detail A.
2. Operate the handle in the direction of the arrow as Detail B.
Each stroke of the handle will wind the webbing to pull
the load.
CAUTION!
DO NOT OVERLOAD
MAINTENANCE
Check for damaged parts. Before using any tool, any part that appears to be damaged should be carefully checked
to determine that it will operate properly and perform its intended functions. Check for alignment and binding of
moving parts, for broken parts or for any other condition that may affect proper operation. Any part that is damaged
should be repaired or replaced by a qualified technician.
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
