120 lb. Broadcast Spreader
3
Visit www.princessauto.com for more information
8463978
V 2.9
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI) when using the tool.
1. Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand and head
protection. Always wear ANSI approved impact safety goggles, which must provide both frontal
and side protection. Protect your hands with suitable gloves. Protect your head from falling
objects by wearing a hard hat. Wear an ANSI approved dust mask or respirator when working
around chemical dusts and mists. Wear ANSI approved earplugs. Protective, electrically non-
conductive clothes and non-skid footwear are recommended when working. Wear steel-toed
boots to prevent injury from falling objects.
2. Control the tool, personal movement and the work environment to avoid personal injury or
damage to the tool. Stay alert, watch what you are doing and use your common sense.
a. Keep articles of clothing, jewelry, hair, etc., away from moving parts to avoid entanglement
with a tool.
b. Do not operate any machine / tool when tired or under the influence of drugs,
alcohol or medications.
c. Do not overreach when operating a tool. Proper footing and balance enables better control
of a tool in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
1. Do not spread seed or fertilizer on windy days.
2. Protective clothing must be worn when spreading fertilizer and seed.
3. Ensure that the correct chemical concentrations are in place before spreading.
4. Flush out the system after each use.
5. Never put any flammable materials in the spreader.
6. Observe the warnings on the packaging of any products used for fertilizing. Fertilizing products
are hazardous to your health. Wear proper breathing equipment and clothing when handling
and spreading.
7. Do not direct the spray towards people or animals.
8. Care must be taken with any weed killer, pesticide or combination product. They can be harmful
to other vegetation in the yard.
TOOL USE AND CARE
1. Use the correct tool for the job. Maximize tool performance and safety by using the tool for its
intended task.
2. Do not modify this tool or use for a purpose for which it was not designed.
3. This tool was designed for a specific function.
Do Not:
a. Modify or alter the tool; all parts and accessories are designed with built-it safety features
that may be compromised if altered.
b. Use the tool in a way for which it was not designed.
