Power Dynamics 171.193 Скачать руководство пользователя страница 4

 

4 - 32 

 

 

 

Important Safety Instructions 

1. Read Instructions – All the safety and operating 
instructions should be read before this product is 
operated. 

2. Retain Instructions 

 The safety and operating 

instructions should be retained for future reference. 

3. Heed Warnings 

 All warnings on the appliance 

and in 
the operating instructions should be adhered to. 

4. Follow Instructions 

 All operating and use 

instructions should be followed. 
5. Improper installaction can cause serious damage to 
people and property. 

6. Water and Moisture 

 The appliance should not be 

used near water - for example, near a bathtub, 
washbowl, kitchen sink, laundry tub, in a wet 
basement, or near a swimming pool, and the like. 

7. Carts and Stands 

 The appliance should be used 

only with a cart or stand that is recommended by the 

manufacturer. An appliance and cart 
combination should be moved with 
care.  
Quick stops, excessive force, and 
uneven surfaces may cause the 

appliance and cart combination to overturn. 

8. Wall or Ceiling Mounting 

 The product should be 

mounted to a wall or ceiling only as recommended by 
the manufacturer. 

9. Heat 

 The appliance should be situated away 

from heat sources such as radiators, heat registers, 
stoves, or other appliances (including amplifiers) that 
produce heat. 
10. Power Sources – This product should be operated 
only from the type of power source indicated on the 
making label. If you are not sure of the type of power 
supply to your home, consult your product dealer or 
local power company. For products intended to 
operate from battery power, or other sources, refer 
the operating instructions. 

11. Power-Cord Protection

Power-supply cords 

should be routed so that they are not likely to be 
walked on or pinched by items placed upon or against 
them, paying particular attention to the cord in 
correspondence of plugs, convenience receptacles, 
and the point where they exit from the appliance. 
12. Cleaning - The appliance should be cleaned only 
as recommended by the manufacturer. Clean by 
wiping with a cloth slightly damp with water. Avoid 
getting water inside the appliance. 

13. Non-use Periods

The power cord of the 

appliance should be unplugged from the outlet when 
left unused for a long period of time. 

14. Object and Liquid Entry 

Care should be taken 

so that objects do not fall and liquids are not spilled 
into the enclosure through openings. 
 
 

15. Damage Requiring Service

The appliance should 

be serviced by qualified service personnel when: 
A. The power-supply cord or the plug has been 
damaged; or 
B. Objects have fallen, or liquid has been spilled into 
the appliance; or 
C. The appliance has been exposed to rain; or 
D. The appliance does not appear to operate normally 
or exhibits a marked change in performance; or 
E. The appliance has been dropped, or the enclosure 
damaged. 

16. Servicing

The user should not attempt any service 

to the appliance beyond that described in the operating 
instructions. All other servicing should be referred to 
qualified service personnel. 
17. Ventilation – Slots and openings in the cabinet are 
provided for ventilation and to ensure reliable operation 
of the product and to protect it from overheating, and 
these openings must not be blocked or covered. The 
openings should never be blocked by placing the 
product on a bed, sofa, rug, or other similar surface. 
This product should not be placed in a built-in 
installation such as a bookcase or rack unless proper 
ventilation is the manufacturer’s instructions have been 
adhered to. 
18. Attachments – do not use attachments not 
recommended by the product manufacturer as they 
may cause hazards. 
19. Accessories – Do not place this product on an 
unstable cart, stand, tripod, bracket, or table. The 
product may fall, causing serious injury to a child or 
adult, and serious damage to the product. Use only 
with a cart, stand, tripod, bracket, or table 
recommended by the manufacturer, or sold with the 
product. Any mounting of the product should follow the 
manufacturer’s instructions, and should use a mounting 
accessory recommended by the manufacturer. 
20. Lightning – For added protection for this product 
during a lightning storm, or when it is left unattended 
and unused for long periods of time, unplug it from the 
wall outlet and disconnect the antenna or cable system. 
This will prevent damage to the product due to lightning 
and power-line surges. 
21. Replacement Parts – When replacement parts are 
required, be sure the service technician has used 
replacement parts specified by the manufacturer or 
have the same characteristics as the original part. 
Unauthorized substitutions may result in fire, electric 
shock, or other hazards. 
22. Safety Check – Upon completion of any service or 
repairs to this product, ask the service technician to 
perform safety checks to determine that the product is 
in proper operating condition. 

  

Содержание 171.193

































Отзывы: