6
Powercraft
CORDLESS IMPACT DRILL
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES ON PAGE 2
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig. A
1 Direction switch
2 On/off switch
3 Torque setting ring
4 Impact sleeve
5 Chuck
6 Battery
PACKAGE CONTENTS
1 Cordless drill
1 Battery
1 Battery charger
8 Accessories
1 Blow
case
1 Instruction manual
1 Guarantee
card
Check the machine and accessories for transport
damage.
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
GENERAL SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury,
including the following. Read all these instructions
before attempting to operate this product.
Retain for future refence.
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
area well lit. Do not use power tools in presence of
flammable liquids or gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges refrigerators).
4. Keep children away.
Do not let visitors contact tool or extension cord.
All visitors should be kept away from work area.
5. Store idle tools.
When not in use, tools should be stored in dry place,
out of reach of children.
6. Do not force tool.
It will do the job better and safer at the rate for which
it was intended.
7. Use right tool.
Do not force small tools or attachments to do the
job of heavy duty tool. Do not use tools for purposes
not intended.
8. Dress properly.
Do not wear loose clothing or jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working
outdoors. Wear protective hair covering to contain
long hair.
9. Use safety glasses.
Also use face or dust mask if cutting operation is
dusty.
10.Do not abuse cord.
Never carry tool by cord or yank it to disconnect it
from receptacle. Keep cord away from heat, oil and
sharp edges.
11.Secure work.
Use clamps or a vice to hold work. It is safer than
using your hand and it frees both hands to operate
tool.
12.Do not overreach.
Keep proper footing and balance at all times.
13.Maintain tools with care.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and, if damaged, have repaired by authorized service
facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean and free
from oil and grease.
14.Disconnect tools.
When not in use, before servicing, and when
changing accessories such as blades, bits and cutters.
15.Remove adjusting keys and wrenches.
Form the habit of checking to see that keys and
adjusting wrenches are removed from tool before
turning it on.
Voltage | 24
V
—
---
Voltage battery charger
| 230 V~
Frequency battery charger
| 50 Hz
Capacity battery
| 1.5 Ah (NiCd)
Charging time
| 1.5 h
Speed, no load
| 0-500/0-1400/min
Impact frequency
| 0 -8000/0-22400/min
Machine weight (incl. battery) | 2.5 kg
Lpa Sound pressure level
| 91.3 dB(A)
Lwa Sound power level
| 104.3 dB(A)
Vibration
| 7.0 m/s
2
Powercraft
3
MAINTENANCE
While maintaining and cleaning the machine pull
the plug from the mainssocket. Never use water or
other agressive liquids to clean the machine. Clean the
machine by brushing it with a brush.
These machines have been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the motor.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please
contact your local dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local dealer.
Here they will be disposed of in an environmentally safe
way.
NiCd cells are recyclable. Take them to your local dealer
or a local recycling station. The collected battery packs
will be recycled or disposed of in an environmentally safe
way.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN50260-1, EN50260-2-1, EN50260-2-2,
EN55014-1, EN55014-2, EN60335-1,
EN60335-2-29, EN61000-3-2, EN61000-3-3.
in accordance with the regulations.
98/37EEC,
73/23/EEC,
89/336/EEC
from 01-05-2002
Oststrasse 11-13
50996 KÖLN BRD
E. Kok
Quality department
CE
ı
DECLARATION OF CONFORMITY
(UK)
