CHARGING THE BATTERY
Fig.F
The PCCL-1800 charger is only suitable for charging
type PCCB-1800 batteries.
•
Place the battery (5) in the battery charger (11) as the
diagram indicates. Make sure that the poles are
placed correctly as indicated by the + and -.
•
Place the battery charger's plug in the socket. The
red speed charging indicator (12) will light up.
•
Charging is complete as soon as the green indicator
(13) for the minimum charge lights up. The battery is
ready for use.
Only use the battery charger in a dry environment
at a temperature between 10°C and 40°C.
The battery of your drill/driver is uncharged whilst it
works. Before using it for the first time you should
charge it for 1 to 2 hours to achieve maximum
performance.
The battery's full capacity is reached after charging /
using it for 4 to 5 cycles.
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
These machines have been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please
contact your local Powercraft dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Powercraft-
dealer. Here they will be disposed of in an
environmentally safe way.
NiCd cells are recyclable. Take them to your local
recycling station. The collected battery packs will be
recycled or disposed of in an environmentally safe way.
GUARANTEE
For the conditions of guarantee, please refer to the
separately provided guarantee card.
We declare under our sole responsability that this
product is in conformity with the following
standards or standardized documents
EN50260-1, EN50260-2-1, EN50260-2-2,
EN60335-1,EN60335-2-29, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37/EEC,
73/23/EEC,
89/336/EEC
from 01-03-2004
Oststrasse 11 -13
50996 KÖLN BRD
E. Kok
Quality department
CE
ı
DECLARATION OF CONFORMITY
(UK)
6
Powercraft
CORDLESS DRILL/DRIVER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1
Cordless drill/driver
2 Batteries, type PCCB-1800
1
Battery charger, type PCCL-1800
2 Double-sided screwing bits
1 Case
1
Instructions
1 Guarantee
card
Check the machine, loose parts and accessories for
transport damage.
PRODUCT INFORMATION
Fig.A
1
On/off switch
2
Speed switch
3
Torque dial
4
Drill chuck
5
Battery
6
Forward / reverse switch
EXPLANATION OF SYMBOLS
In accordance with essential applicable safety
standards of European directives.
Class II machine – Double insulation – You don’t
need any earthed plug.
Risk of material damage and/or physical injury.
Risk of an electric shock.
NiCd batteries are recyclable. Take them to your
local recycling station. The collected battery packs
will be recycled or disposed of in an
environmentally safe way.
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Always check that the power supply corresponds to the
voltage on the rating plate. Also check that your mains
voltage corresponds to the input voltage of the battery charger.
The battery charger is double insulated in accordance
with EN 60335; therefore no earth wire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm
2
. When using a cable reel always unwind
the reel completely.
NiCd
NiCd
Voltage
| 18 V—
---
Voltage of battery charger
| 230 V~
Frequency of battery charger | 50 Hz
Battery performance
| 1.3 Ah
Charging time
| 1 hr
Number of drilling speeds
| 2
No load speed
| 0-400 / 0-1150
Torque
| 20 Nm
Drill chuck jaw
| 0.8 - 10 mm
Weight (incl. battery)
| 1.8 kg
Lpa (noise burden)
| < 75 dB(A)
Vibration value
| < 2.5 m/s
2
Powercraft
3
