UK Help Line: 0870 - 7323023 / IRELAND Help Line: 1800-481005 - Powercraft
5
4. Grinding
disc
5. Spindle
lock
6.
Switch lock
In this manual and/or on the machine the following symbols are used:
Read instructions carefully
In accordance with essential applicable safety standards of European Directives
Class II machine – Double insulation – You don’t need an earthed plug.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Immediately disconnect the plug from the mains electricity if the cord gets
damaged and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic apparatus must be collected at the
appropriate recycling locations.
2. SAFETY INSTRUCTIONS
GB
12
UK Help Line: 0870 - 7323023 / IRELAND Help Line: 1800-481005 - Powercraft
Faults
Should a fault occur, e.g. after wear of a part, please contact the address on the guarantee card.
In the back of this manual you find an exploded view showing the parts that can be ordered.
Environment
In order to prevent the machine from damage during transport, it is delivered in sturdy
packaging. Most of the packaging materials can be recycled. Take these materials to the
appropriate recycling locations.
Faulty and/or discarded electrical or electronic apparatus must be collected at the
appropriate recycling locations.
Guarantee
The guarantee conditions can be found on the separately enclosed guarantee card.
We declare under our sole responsibility that this product is in conformity with the following
standards or standardised documents:
EN50144-1:1998+A1:2002, EN50144-2-3:2002+A1:2002+A2:2003,
EN55014-1:2000+A1:2001+A2:2002, EN55014-2:1997+A1:2001,
EN610000-3-2:2000, EN61000-3-3:1995+corr:1997+A1:2001
in accordance with the regulations.
98/37/EC , 73/23/EEC , 89/336/EEC, 2002/95/EC, 2002/96/EC
from 01-10-2006
ZWOLLE NL
J.A. Bakker - van Ingen
J. Lodewijk
CEO Ferm BV
Quality Manager Ferm Global
It is our policy to continuously improve our products and we therefore reserve the right to
change the product specification without prior notice.
Servotool BV • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands
CE
DECLARATION OF CONFORMITY (GB)
GB
