25
Assembly
Remove the spark plug cable as shown
in the illustration under Special Safety
Instructions.
Remove the grass bag (12). Fold the
handlebar out (2) so that its upper and
lower parts are in line with each other.
Tighten the adjustment knobs (4). Lift
the entire handlebar off the mower.
Take care to avoid bending or breaking
the control cables.
Screw the handlebar tight against the
bracket using the retaining screw
handles (5). Select a hole on the
bracket according to the angle you
want the handlebar to be at (3 options).
Fasten the control cables to the handle-
bar using the brackets (c) on the bar.
Press the cut-out handle (3) inwards
and pull the starting handle (d) slowly
out. Secure the starting handle to the
handlebar using the cable bracket.
Attach spark plug cable to spark plug.
ENGLISH
INSTRUCTION MANUAL
Содержание 78503
