19
ENGLISH
INSTRUCTION MANUAL
Introduction
To get the most out of your new chain grinder,
please read through these instructions and the
attached safety regulations before use. We also
recommend that you save the instructions in case
you need to remind yourself of the chain grinder’s
functions at a later date.
Go to www.powercraft.com for further information
on our products.
Technical specifications
Voltage/frequency:
230 V ~ 50 Hz
Power rating:
85 W
Free rotation speed:
5,300 rpm
Grinding disc:
diameter 100 mm,
hole diameter 22.3 mm
Chain size:
1/4" + 3/8"
Grinding angle:
0-35° to right and left
Weight:
approx. 2.2 kg
Chain grinder parts
1. Motor
2. Protective shield
3. Grinding disc
4. Mounting screws
5. Depth limit
6. Top
7. Hinge
8. Mounting holes
9. Lock knob
10. Turntable
11. Angle gauge
12. Lock handle
13. Chain stop
14. Adjustment knob
15. Lock Nut
16. Chain rail
17. Base
18. Handle
Special safety instructions
The chain grinder must not be used for grinding
anything other than power saw chains.
Always use protective goggles and ear protection
when using the chain grinder.
Never used damaged grinding discs.
Never use grinding discs that are too large or with
a hole diameter that is too large.
Never use discs with a maximum RPM less than
that of the tool.
Never tighten the outer flange too much, as this
may damage the grinding disc.
Never stick your hands into the working area while
the chain grinder is running.
Never allow the disc to be in contact with the item
to be worked - or other objects - when starting the
chain grinder. Let the grinding disc run for around
one minute before commencing grinding.
Содержание 69780
Страница 27: ...27 ILLUSTRATION ...
Страница 28: ...28 PART LIST ...
