HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu
13
Operation
Adjusting the speed
Fig. D
The appliance has two drill speeds.
•
For slow drilling or for driving or removing screws, set the speed selection
switch (4) to '1'.
•
For fast drilling set the speed selection switch to '2'.
Never switch speeds when the motor is running!
4
1
2
HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu
12
Mounting accessories
Connecting and removing the battery
Fig. C
Ensure that the exterior of the battery or tool is clean and dry
before connecting the charger.
•
Ensure that the direction reversing switch (5, see page 14) is in the central
position in order to prevent the appliance from being switched on
unexpectedly.
•
Insert the battery into the base of the appliance, as shown on the
illustration above. Push the battery until it latches in.
•
Press the locking buttons (10) on both sides to remove the battery.
Always follow the safety notes and the relevant safety code.
Hold the appliance firmly and press the drill steadily onto the workpiece. Do
not overload the appliance.
7
10
