UK Helpline 0905-460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PAG-125/1020
10
Safety instructions
the machine in case of abnormal vibrations or occurrence of another defect.
Carefully inspect the machine and grinding disc before switching the
machine on again.
•
Make sure that sparks do not put people into danger or that they contact
highly flammable substances.
•
Make sure that the workpiece is sufficiently supported or clamped. Keep
your hands away from the surface to be cut.
•
Always wear safety goggles and hearing protection. If desired or required
also use another kind of protection like for example an apron or helmet.
•
Ensure that mounted wheels and points are fitted in accordance with the
manufacturer’s instructions.
•
Ensure that blotters are used when they are provided with the bonded
abrasive product and when they are required.
•
If a guard is supplied with the tool never use the tool without such a guard.
•
For tools intended to be fitted with threaded hole wheel, ensure that the
thread in the wheel is long enough to accept the spindle length.
•
Ensure that ventilation openings are kept clear when working in dusty
conditions. If it should become nessesary to clear dust, first disconnect the
tool from the mains supply (use non metallic objects) and avoid damaging
internal parts.
•
Use the side handle supplied with the equipment. Any loss of control over
this machine can lead to injuries.
•
Though poor conditions of the electrical mains, shortly voltage drops can
appear when starting the equipment. This can influence other equipment
(eq. blinking of a lamp). If the mains-impedance Zmax <0.348 Ohm, such
disturbances are not expected. (In case of need, you may contact your local
supply authority for further information.
•
Do not use cutting discs for grinding.
•
If a protective cover or guard is supplied with a power tool, never operate
that tool without it.
•
Always wear protective gear such as gloves and a dust mask.
Always check that the power supply corresponds to the voltage on
the rating plate.
Your machine is double insulated in accordance with EN 50144;
therefore no earthwire is required.
