background image

                   WARNINGS: INVERTER OUTPUT 

                  This is a heavy-duty device that produces voltages similar to        
                   commercial AC power.  

  Danger of shock or electrocution - treat inverter output the same 

as commercial AC power.  

  Do not use the inverter near flammable materials or in any 

locations that may accumulate flammable fumes or gases. This 
is an electrical device that can briefly spark when electrical 
connections are made or broken. 

  Do not allow water or other liquids to contact the inverter. 

  Do not use appliances with damaged or wet cords. 

 

                   CAUTIONS: INVERTER OPERATING ENVIROMENT 

        Surrounding air temperature should be between -20°C and       

        40°C – ideally between 15°C and 25°C (60 - 80°F).  

  Keep the inverter away from direct sunlight, if at all possible. 

  Keep the area surrounding the inverter clear to ensure free air 

circulation around the unit. Do not place items on or over the 
inverter during operation. The unit will shut down if the internal 
temperature gets too hot. Restart the inverter after it cools.  

 This 

PowerBright

TM

 inverter will only operate from a 12V power 

source. Do not attempt to connect the inverter to any other 
power source, including any AC power source 

  Do not reverse DC input polarity – this will void the warranty. 

 

                   APPLIANCE CAUTIONS 

        DO NOT plug in battery chargers for cordless power tools if    

        the charger carries a warning that dangerous voltages are 

present at the battery terminals. 

  Certain chargers for small nickel-cadmium or nickel-metal-

hydride batteries can be damaged if powered by this inverter. 
Two types of appliances are susceptible to damage: Small, 
battery-operated appliances such as flashlights, cordless razors 
and toothbrushes that plug directly into an AC receptacle. 

  DO NOT use this inverter with the above two types of equipment. 

  The majority of portable appliances do not have this problem. 

Most portable appliances use separate transformers or chargers 
that plug into AC receptacles to supply a low-voltage DC or AC 

Содержание PW1500-12





























Отзывы: