- 23 -
REQUIREMENTS
1) Do not use and store the loader in dusty, high temperature and high Humidity
environments.
2) Do ground all equipments and works in order to avoid causing damage to The
loader by electrostatic discharges.
3) The user who handles this product should take all necessary precautions To avoid
ESD (Electro-Static Discharge) failures.
4) Do not touch assembled PCB with hand directly, avoid fingerprints or stains
Remains on the PCB and handle the loader in a clean environment
5) Do not shock loader during handing and manufacturing
6) Do not use loader immediately when you bring it from cold to warm place. Great
change of temperature may cause moisture condensing on the Pickup lens which
influences the readability for certain time. Please make the loader stable at least 2
hours before operating under such a condition.
7) Do not disassemble the loader to avoid ESD failures and to prevent from
Contamination.
REPLACE THE FUSE
Make sure the amperage match the specified when replacing the fuses. If the fuse is
broken, check the power connection and replace a new one. If the same problem
occurs, it would be subjected to the malfunction in-house. In such cases, please
consult the nearest service dealer.
! A Warning
Never use the fuse with the rated amperage more than that supplied to your unit,
otherwise it will damage the unit
