1.Remove the headrest from the seat.
2.Replace the headrest monitor, You may adjust the stainless steel
adjusting tube until the headrest monitor can be easily fitted into the
seat. ( Maximum adjusting width is 5.5
＂
to 7
＂
cm )
3.
The electric circuit of the headrest monitor can be connected easily.
You can connect it to the 12V power of the car. ( Red to +, Black to - ),
then connect the Video's signal from your driving source.
4.
After you correctly install the headrest monitor, press the on/off, Power
button to make sure it's getting power and video signal. You may need
to adjust Brightness, Contrast and Color.
Installation instructions
SPECIFICATION:
System Type: NTSC/PAL
Resolution: 640X480
Supply Power:+12V
Power consumption:8W
Usage
Environment:
-20°
C
to
+
50°C