manualshive.com logo in svg

Poulan Pro XT 433507, Руководство оператора, Страница: 21 / 30

Поделиться
Скачать
Poulan Pro XT 433507 Скачать руководство пользователя страница 21

21

TO REPLACE MOWER BLADE DRIVE BELT 

(See Fig. 19)

The mower blade drive belt may be replaced without tools.  

Park the tractor on level surface.  Engage parking brake.  
BELT REMOVAL -

•  Remove mower from tractor (See “TO REMOVE 

MOW ER” in this section of this manual).

•  Work belt off both mandrel pulleys and idler pulleys.

•  Pull belt away from mower. 
BELT INSTALLATION -

•  Install new belt in reverse order of removal.

•  Make sure belt is in all pulley grooves and in side all 

belt guides.

•  Install mower in reverse order of removal instruc-

tions.

SERVICE AND ADJUSTMENTS

FIG. 20

TO REPLACE MOTION DRIVE BELT 

(See Fig. 20)

Park the tractor on level surface.  En gage parking brake.  

For as sis tance, there is a belt installation guide decal on 

bottom side of left footrest.
BELT REMOVAL -

•  Remove mower (See “TO RE MOVE MOWER” in this 

section of manual).

NOTE:

 Observe entire motion drive belt and position of all 

belt guides and keepers.
•  Remove belt from stationary idler and clutching idler.
•  Remove belt downward from around en gine pulley.
•  Pull belt slack toward rear of trac tor.  Remove belt 

upwards from transaxle pulley by de flect ing belt keep-

 ers.

•  Remove belt from center span keeper and pull belt 

away from tractor.

BELT INSTALLATION -

•  Carefully work new belt down be tween transaxle belt 

keepers and onto the input pulley.

•  Slide belt into the center span keeper.
•  Pull belt toward front of tractor and roll around the top 

groove of engine pulley.

•  Install belt through stationary idler and clutch ing 

idler.

•  Make sure belt is in all pulley grooves and in side all 

belt guides and keep ers.

• 

Install mower (See “TO IN STALL MOWER” in this sec-

 tion of manual).

FIG. 19

IDLER PULLEYS

MANDREL PULLEYS

TRANSAXLE 

PULLEY

STA TION ARY 

IDLER

CLUTCHING 

IDLER

ENGINE 

PULLEY

CENTER SPAN

KEEPER

TO CHECK BRAKE 

If tractor requires more than five (5) feet to stop at highest 

speed in high est gear on a level, dry concrete or paved 

surface, then brake must be serviced.
You may also check brake by:
1.  Park tractor on a level, dry concrete or paved surface, 

depress clutch/brake pedal all the way down and en-

gage parking brake.

2.  Place gear shift lever in neutral (N) position.
The rear wheels must lock and skid when you try to manu-

ally push the tractor forward. If the rear wheels rotate, then 

the brake needs to be serviced. Contact a qualified service 

center.

Содержание XT 433507































Отзывы:

Нет отзывов