Poulan Pro PR450N20S Скачать руководство пользователя страница 11

11

OPERATION

FOR MULCHING MOWERS ONLY

Most mulching mowers are shipped ready 
to be used as a mulcher.  

“REAR DISCHARGE ONLY” MOWERS 

Some models have a seperate mulcher 
plug, other models have the mulcher plug 
built into the rear door.  To convert to bag-
ging or discharging, the plate or plug (if 
so equipped) must be removed from the 
dis charge open ing of the lawn mower.
•  Open rear door and remove mulcher 

plate or plug (if so equipped).  Store 
mulcher plate or plug in a safe place.

•  You can now install grass catcher or 

optional clipping deflector accessory.

•  To return to mulching operation, install 

mulcher plate or plug into discharge 
opening of mower.  

 

CAUTION: 

 Do not run your lawn 

mower without mulcher plate/plug in 
place or ap proved clipping deflector or 
grass catch er in place.  Never attempt to 
op er ate the lawn mower with the rear door 
removed or propped open.

MULCHER
"PLUG":

Slots

Mulcher 

plate tabs

Mulcher plug

MULCHER
"PLATE":

MULCHER PLUG BUILT INTO REAR DOOR

“SIDE DISCHARGE ONLY” MOWERS

MULCHER PLATE TYPE 
To convert to bagging or discharging, 
mulcher plate must be removed from 
underside of lawn mower.
•  Remove the four (4) screws and lock nuts 

securing the mulcher plate to the mower.

•  Store mulcher plate and hardware in a 

safe place.

•  Mower can now be used for side 

discharging or op tion al grass catcher 
accessory can be attached.

•  To return to mulching operation, simply 

reinstall mulcher plate and tighten hard-
ware securely.

Mulcher plate

Screw and 
lock nut

Содержание PR450N20S

























Отзывы: