manualshive.com logo in svg

Poulan Pro COGT22H48A, Руководство пользователя

Поделиться
Скачать
Poulan Pro COGT22H48A Скачать руководство пользователя страница 23

23

SERVICE AND ADJUSTMENTS

WARNING:  TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY 
SER VICE OR ADJUSTMENTS:

1.   Depress brake pedal fully and set parking brake.
2.   Place attachment clutch  in “DISENGAGED” position.
3.   Turn ignition key to “STOP” and remove key.
4.   Make sure the blades and all moving parts have completely stopped.
5.   Disconnect spark plug wire from spark plug and place wire where it cannot 

come in contact with plug.

02565

TO REMOVE MOWER 

1.   Place attachment clutch in “DIS EN -

GAGED” position.

2.   If equipped, turn height adjustment 

knob to low est setting.

3.   Lower mower to its lowest position.
4.   Disengage belt tension rod from lock 

bracket.

  

CAUTION:

 Rod is spring loaded. Have 

a tight grip on rod and release slowly.
5.   Remove retainer spring holding 

anti-swaybar to chas sis bracket and 
dis en gage anti-sway bar from bracket.

6.   Remove four retainer springs from front 

plate assembly and remove plate.

7.   Remove retainer springs from sus pen -

sion arms at deck and dis en gage arms 
from deck.

8.   Raise attachment lift to its highest posi-

tion.

9.   Slide mower forward and remove belt 

from electric clutch pulley.

10. Slide mower out from under right side 

of tractor.

TO INSTALL MOWER

Be sure tractor is on level surface and 
mower suspension arms are raised with 

attachment lift control. Engage park ing 
brake.
1.   Swing anti-sway bar to left side of 

mower deck.

2.   Slide mower under tractor with defl ec-

tor shield to right side of tractor.

IMPORTANT: 

 Check belt for proper rout-

ing in all mower pulley grooves.  
3.   If equipped, turn height ad just ment 

knob coun ter clock wise until it stops.

4.   Lower mower linkage with attachment 

lift control.

5.   Be sure belt tension rod is in dis en -

gaged position.

6.   Install belt into electric clutch pulley 

groove.

7.   Place the suspension arms on outward 

pointing deck pins.  Retain with double 
loop re tain er spring with loops up as 
shown.

8.   Install front plate assembly to tractor 

suspension brackets and retain with 
single loop retainer springs as shown.

9.   Position front plate assembly between 

front mower brackets. Raise deck and 
plate assembly to align holes and 
insert fl anged pins. Secure pins with 
double loop retainer springs between 
the plate assembly and mower brack-
 ets.

Lock Bracket

Retainer 
Spring

Anti-Sway 
Bar

Suspension Arms
Double Loop
Retainer Springs
(Outward pointing 
deck pins)

Chassis 
Bracket

Single Loop
Retainer Springs

Front 
Mower 
Bracket

Front Mower 
Bracket

Electric Clutch 
Pulley

Front Plate 
Assembly

Belt Tension 
Rod 
(Disengaged 
Position)

Double Loop
Retainer Springs

Flanged Pins

Defl ector Shield

USE PLIERS FOR

RETAINER SPRINGS

Loop Up

Содержание COGT22H48A


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды