Poulan Pro 967333801-00 Скачать руководство пользователя страница 9

9

SAFETY

•  Remove gas-powered equipment from the truck or trailer 

and refuel it on the ground. If this is not possible, refuel 
such equipment with a portable container, rather than from 
a gasoline dispenser nozzle.

•  Keep the nozzle in contact with the rim of the fuel tank or 

container opening at all times until fueling is complete. Do 
not use a nozzle lock-open device.

•  If fuel is spilled on clothing, change clothing immediately.
•  Do not start the engine near spilled fuel.
•  Never use gasoline as a cleaning agent.
•  If leaks arise in fuel system, engine must not be started until 

problem has been resolved.

•  Check the fuel level before each use and leave space for 

the fuel to expand, as the heat from the engine and the sun 
may otherwise cause the fuel to expand and overflow.

General Maintenance

•  Never use the machine 

indoors or in spaces lacking 
proper ventilation. The 
exhaust fumes contain 
carbon monoxide, an 
odorless and poisonous 
lethal gas.

•  Maintain or replace safety 

and instruction labels as 
necessary.

•  Never interfere with the intended function of a safety device 

or reduce the protection provided by a safety device. 
Check their proper operation regularly. NEVER operate 
a machine with a safety device that does not function 
properly.

•  Check grass catcher components and the discharge guard 

frequently and replace with manufacturer’s recommended 
parts when necessary.

  WARNING!  

The engine must not be started when 

the driver’s floor plate or any protective plate for the mower 

deck’s drive belt is removed.

  WARNING! 

The battery contains lead and lead 

compounds, chemicals that are considered to cause 

cancer, birth defects, and other reproductive system 

damage. Wash your hands after handling the battery.

•  Make sure that the equipment is in good condition and 

that all nuts and bolts, especially those fastening the blade 
attachments, are properly tightened and torqued.

•  Ensure that the fuel filler cap is mounted tightly and no 

flammable substances are stored in an open vessel.

•  Sparking can occur when 

working with the battery 
and the heavy cables of 
the starter circuit. This can 
cause battery explosion, 
fire or eye injury. Sparking 
will not occur after the 
grounding cable (normally 
negative, black) is removed 
from the battery.

•  Disconnect the grounding cable from the battery first and 

reconnect it last.

•  Do not make a bridge short circuit across the starter relay 

to run the starter.

•  Be very careful when handling battery acid. Acid on skin 

can cause serious corrosive burns. If you spill battery acid 
on your skin, rinse immediately with water. Acid in the eyes 
can cause blindness, contact a doctor immediately.

•  Be careful when servicing the battery. Explosive gases 

form in the battery. Never 
perform maintenance on the 
battery when smoking or 
near open flames or sparks. 
The battery can explode 
and cause serious injury or 
damage.

•  The machine is tested 

and approved only with 
the equipment originally 
provided or recommended by the manufacturer. Only use 
approved repair parts for the machine.

•  The blades are sharp and can cause cuts and gashes. 

Wrap the blades or use protective gloves when handling 
them.

•  Check the park brake’s functionality regularly. Adjust and 

service as necessary.

•  The mulch blades should only be used in familiar areas 

when higher quality mowing is desired.

•  Regularly clean deck and underside of deck, avoid 

spraying engine and electrical components with water.

•  Do not change the settings of governors and avoid running 

the engine with overly high engine speeds. If you run the 
engine too fast, machine components could be damaged.

•  To reduce the risk of fire, keep machine free of grass, 

leaves or other debris buildup. Clean oil or fuel spills and 
remove any fuel-soaked debris. Allow machine to cool 
before storing.

•  Stop to inspect the equipment if you run over or into 

anything. If necessary, make repairs before starting.

•  Never make adjustments or repairs with the engine running.
•  Never work with the starter circuit if there is spilled fuel.

  CAUTION! 

Use protective glasses for 

maintenance work.

Содержание 967333801-00









































Отзывы: