3
S
Keep the handles dry and clean and
free from oil and grease.
S
Keep oil cap and fasteners securely
tightened.
S
Nonconforming replacement compo-
nents or the removal of safety devices
may cause damage to the unit and pos-
sible injury to the operator or bystand-
ers. Use only Poulan PRO accessories
and replacement parts as recom-
mended. Never modify your saw.
S
Maintain chain saw with care.
S
Keep unit sharp and clean for better and
safer performance.
S
Follow instructions for lubricating and
changing accessories.
S
Unplug the chain saw from the power
source when not in use, before servic-
ing, and when changing accessories
and attachments, such as saw chain
and guard.
S
Check for damaged parts. Before fur-
ther use of the chain saw, a guard or
other part that is damaged should be
carefully checked to determine that it will
operate properly and perform its in-
tended function. Check for alignment of
moving parts, binding of moving parts,
breakage of parts, mounting and any
other conditions that may affect its op-
eration. A guard or other part that is
damaged should be properly repaired
or replaced by an authorized service
dealer unless otherwise indicated else-
where in the instruction manual.
S
When not in use, chain saws should be
stored in a dry, high or locked-up place
out of the reach of children.
S
When storing saw, unplug and use a bar
sheath or carrying case.
ELECTRICAL SAFETY
WARNING:
Avoid a dangerous
environment. To reduce the risk of elec-
trical shock, do not use in rain, in damp
or wet locations, or around swimming
pools, hot tubs, etc. Do not expose to
snow, rain, or water to avoid the possibil-
ity of electrical shock. Do not handle ex-
tension cord or plug with wet hands.
S
Use a voltage supply as shown on the
nameplate of the unit.
S
Avoid dangerous situations. Do not use
in the presence of flammable liquids or
gases to avoid creating a fire or explo-
sion and/or causing damage to unit.
S
To reduce the risk of electrical shock,
this appliance has a polarized plug (one
blade is wider than the other) and will re-
quire the use of a polarized extension
cord. The appliance plug will fit into a po-
larized extension cord only one way. If
the plug does not fit fully into the exten-
sion cord, reverse the plug. If the plug
still does not fit, obtain a correct polar-
ized extension cord. A polarized exten-
sion cord will require the use of a polar-
ized wall outlet. This plug will fit into the
polarized wall outlet only one way. If
plug does not fit fully into the wall outlet,
reverse the plug. If the plug still does not
fit, contact a qualified electrician to install
the proper wall outlet. Do not change the
equipment plug, extension cord recep-
tacle, or extension cord plug in any way.
S
To reduce risk of electrical shock, use
extension cords specifically marked as
suitable for outdoor appliances. The
electrical rating of the cord must not be
less than the rating of unit. The cord
must be marked with suffix “W--A” (in
Canada, “W”). Use a polarized cord.
Make sure your extension cord is in
good condition. Inspect extension cord
before use and replace if damaged. Do
not use a damaged cord. Cord insula-
tion must be intact with no cracks or de-
terioration. Plug connectors must be
undamaged. An undersized extension
cord will cause a drop in line voltage re-
sulting in loss of power and overheating.
If in doubt, use the next heavier gauge.
The lower the gauge number, the heavi-
er the cord (see
SELECT AN EXTENSION
CORD
in the
OPERATION
section). Do
not use multiple cords.
S
Do not abuse cord. Never carry the unit
by the extension cord or yank extension
cord to disconnect unit.
S
Secure extension cord to power cord to
prevent disconnection from unit.
S
Do not use the unit if the switch does not
turn the unit on and off properly, or if the
lockout does not work. Repairs to the
switch must be made by an authorized
service dealer.
S
Keep extension cord clear of operator
and obstacles at all times. Position cord
so that it will not be caught on branches.
Do not expose cords to heat, oil, water,
or sharp edges.
S
To avoid the possibility of electric shock,
avoid body contact with any grounded
conductor, such as metal fences or
pipes.
S
Ground Fault Circuit Interrupter (GFCI)
protection should be provided on circuit
or outlet to be used. Receptacles are
available having built-in GFCI protection
and may be used for this measure of
safety. Inspect chain saw cords periodi-
cally and if damaged, have repaired by
an authorized service dealer.
