13
EDGER SAFETY
WARNING:
Inspect the area to be
edged before each use. Remove objects
(rocks, broken glass, nails, wire, etc.) which
can be thrown by the blade or can wrap
around the shaft.
S
Blade rotates momentarily after the trigger
is released. The blade can seriously cut
you or others.
S
Allow blade to stop before removing it from
the cut.
S
Throw away blades that are bent, warped,
cracked, broken or damaged in any other
way.
Replace parts that are cracked,
chipped, or damaged before using the unit.
S
Do not attempt to remove cut material nor
hold material to be cut when the engine is
running or when cutting blade is moving.
S
Always keep the wheel and depth adjusting
skid in contact with the ground.
S
Always push the unit slowly over the
ground. Stay alert for uneven sidewalks,
holes in the terrain, large roots, etc.
S
Always use the handlebar when using
edger attachment.
BLOWER/VACUUM SAFETY
WARNING:
Inspect area before
starting unit. Remove all debris and hard ob-
jects such as rocks, glass, wire, etc. that can
ricochet, be thrown, or otherwise cause injury
or damage during operation.
S
Do not set unit on any surface except a clean,
hard area while engine is running. Debris
such as gravel, sand, dust, grass, etc., could
be picked up by the air intake and thrown out
through discharge opening, damaging unit,
property,
or causing
serious
injury
to
bystanders or operator.
S
Never place objects inside the blower
tubes, vacuum tubes or blower outlet.
Always direct the blowing debris away from
people, animals, glass, and solid objects
such as trees, automobiles, walls, etc. The
force of air can cause rocks, dirt, or sticks to
be thrown or to ricochet which can hurt
people or animals, break glass, or cause
other damage.
S
Never
run
unit
without
the
proper
equipment attached. When using your unit
as a blower, always install blower tubes.
S
Check air intake opening, blower tubes or
vacuum tubes frequently, always with
engine
stopped
and
spark
plug
disconnected. Keep vents and discharge
tubes free of debris which can accumulate
and restrict proper air flow.
S
Never place any object in air intake opening
as this could restrict proper air flow and cause
damage to the unit.
S
Never use for spreading chemicals, fertilizers,
or other substances which may contain toxic
materials.
S
To avoid spreading fire, do not use near leaf or
brush
fires,
fireplaces,
barbecue
pits,
ashtrays, etc.
CULTIVATOR SAFETY
WARNING:
Rotating tines can cause
serious injury. Keep away from rotating tines.
Stop the engine and disconnect the spark plug
before unclogging tines or making repairs.
WARNING:
Inspect the area to be
cultivated before starting the unit. Remove all
debris and hard and sharp objects such as
rocks, vines, branches, rope, string, etc.
S
Avoid heavy contact with solid objects that
might stop the tines. If heavy contact occurs,
stop the engine and inspect the unit for
damage.
S
Never operate the cultivator without the tine
cover in place and properly secured.
S
Keep the tines and guard clear of debris.
S
After striking a foreign object, stop the
engine, disconnect the spark plug and
inspect the cultivator for damage. Repair
before restarting.
S
Disconnect attachment from the drive engine
before cleaning the tines with a hose and
water to remove any build--up. Oil the tines to
prevent rust.
S
Always wear gloves when servicing or
cleaning the tines. The tines become very
sharp from use.
S
Do not run unit at high speed unless
cultivating.
HEDGE TRIMMER SAFETY
DANGER:
RISK OF CUT; KEEP
HANDS AWAY FROM BLADE -- Blade moves
momentarily after the trigger is released. Do not
attempt to clear away cut material when the
blade is in motion. Make sure the switch is in the
OFF position, the spark plug wire is discon-
nected, and the blade has stopped moving be-
fore removing jammed material from the cutting
blade. Do not grab or hold the unit by the cutting
blade.
Allow blades to stop
before removing
them from the cut.
Blades move
momentarily
after the
trigger is
released.
