Poulan Pro 401423 Скачать руководство пользователя страница 21

21

LIMITED WARRANTY

The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from de-
fects in materials and work man ship. For a period of two (2) years from date of purchase by the original consumer 
purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in replacing parts, any 
part which we fi nd to be defective due to materials or workmanship. This Warranty is subject to the following limita-
tions and exclusions.
1.    This warranty does not apply to the engine or components parts thereof.  Please refer to the applicable manu-

facturer's warranty on these items.

2.   Transportation charges for the movement of any power equipment unit or attachment are the responsibility of 

the pur chaser.  Transportation charges for any parts submitted for replacement under this warranty must be paid 
by the purchaser unless such return is requested by Electrolux Home Products.

3.    The Warranty period for any products used for rental or commercial purposes is limited to 90 days from the date 

of original purchase.

4.    This Warranty applies only to products which have been properly assembled, adjusted, operated, and maintained 

in ac cor dance with the instructions furnished. This Warranty does not apply to any product which has been 
subjected to alteration, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear 
of the product.

5.    Exclusions: Excluded from this Warranty are belts, tines, tine adapters, normal wear, normal adjustments, stan-

 dard hard ware and normal maintenance.

6.    In the event you have a claim under this Warranty, you must return the product to an authorized  service deal-

er.

Should you have any unanswered questions concerning this Warranty, please contact:

giving the model number, serial number and date of purchase of your product and the name and address of the 
authorized dealer from whom it was purchased.

THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL DAMAGES AND ANY IMPLIED 
WAR RAN TIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN FOR OUR EXPRESSED WAR-
RANTIES. Some areas do not allow the limitation of consequential damages or limitations of how long an implied 
Warranty may last, so the above limitations or exclusions may not apply to you. This Warranty gives you specifi c legal 
rights, and you may have other rights which vary from locale to locale.

This is a limited Warranty within the meaning of that term as defi ned in the Magnuson-Moss Act of 1975.

In Canada contact:

Electrolux Canada Corp.
7075 Ordan Drive
Mississauga, Ontario 
L5T 1K6

Electrolux Home Products, Inc.
Outdoor Products Customer Service Dept.
1030 Stevens Creek Road
Augusta, GA  30907  USA

Содержание 401423























Отзывы: