background image

28

Poor grass 

             1.   Engine speed too slow.            1.   Place throttle control in 

discharge

                                                                            “FAST” position.

                                 2.   Travel speed too fast.               2.   Shift to slower speed.
                                 3.   Wet grass.                                3.   Allow grass to dry before  
                                                                                             mowing.
                                 4.   Mower deck not level.              4.   Level mower deck.
                                 5.   Low/uneven tire air                  5.   Check tires for proper air  
                                       pressure.                                        pressure.
                                 6.   Worn, bent or loose blade.      6.   Replace/sharpen blade.   
                                                                                             Tighten blade bolt.
                                 7.   Buildup of grass, leaves           7.   Clean underside of mower  
                                       and trash under mower.                 housing.
                                 8.   Mower drive belt worn.            8.   Replace mower drive belt.
                                 9.   Blades improperly installed.    9.   Reinstall blades sharp edge  
                                                                                             down.
                                 10. Improper blades used.             10. Replace with blades listed in 
                                                                                             this manual.
                                 11. Clogged mower deck vent       11. Clean around mandrels to 
                                       holes from buildup of grass,           open vent holes.
                                       leaves, and trash around 
                                       mandrels.

Headlight(s) not 

    1.   Switch is “OFF”.                       1.   Turn switch “ON”.

working 

                  2.   Bulb(s) or lamp(s) burned out.   2.   Replace bulb(s) or lamp(s).

(if so equipped)

      3.   Faulty light switch.                   3.   Check/replace light switch.

                                 4.   Loose or damaged wiring.       4.   Check wiring and connections.
                                 5.   Blown fuse.                              5.   Replace fuse.

Battery will not 

      1.   Bad battery cell(s).                  1.   Replace battery.

charge

                     2.   Poor cable connections.          2.   Check/clean all connections.

                                 3.   Faulty regulator                        3.   Replace regulator. 

 

                                       (if so equipped).
                                 4.   Faulty alternator.                      4.   Replace alternator.

Engine “backfi res”

1.   Engine throttle control not set  1.   Move throttle control 

when turning 

               between half and full speed           between half and full speed 

engine “OFF”

               (fast) position before stopping       (fast) position before    

                                       engine.                                           stopping engine.

 PROBLEM                  CAUSE                                      CORRECTION 

TROUBLESHOOTING CHART

Содержание 191616






























Отзывы: