manualshive.com logo in svg

Poulan Pro 188695, Руководство пользователя

Описание продукта "Poulan Pro 188695": Скачайте бесплатно руководство пользователя (Owner's Manual) для Poulan Pro 188695 на manualshive.com. Это необходимое руководство поможет вам полноценно пользоваться вашим устройством. Не упустите возможность ознакомиться с руководством перед использованием продукта.

Поделиться
Скачать
background image

25

TROUBLESHOOTING POINTS

Will not start

                            1.    Out of fuel.                                                                       1.    Fill fuel tank.

                                                  2.    Engine not “CHOKED” properly.                                      2.    See “TO START ENGINE” in Operation section.
                                                  3.    Engine fl ooded.                                                                3.    Wait several minutes before attempting to start.
                                                  4.    Bad spark plug.                                                               4.    Replace spark plug.
                                                  5.    Dirty air fi lter.                                                                   5.    Clean/replace air fi lter.
                                                  6.    Dirty fuel fi lter.                                                                  6.    Replace fuel fi lter.
                                                  7.    Water in fuel.                                                                    7.    Empty fuel tank and carburetor, refi ll tank with fresh  
                                                                                                                                                        gasoline and replace fuel fi lter.
                                                  8.    Loose or damaged wiring.                                               8.    Check all wiring.
                                                  9.    Carburetor out of adjustment.                                          9.    See “To Adjust Carburetor” in Service Adjustments  
                                                                                                                                                        section.
                                                10.    Engine valves out of adjustment.                                   10.    Contact an authorized service center/department.

Hard to start

                            1.    Dirty air fi lter.                                                                   1.    Clean/replace air fi lter.

                                                  2.    Bad spark plug.                                                               2.    Replace spark plug.
                                                  3.    Weak or dead battery.                                                      3.    Recharge or replace battery.
                                                  4.    Dirty fuel fi lter.                                                                  4.    Replace fuel fi lter.
                                                  5.    Stale or dirty fuel.                                                            5.    Empty fuel tank and refi ll tank with fresh, clean gasoline.
                                                  6.    Loose or damaged wiring.                                               6.    Check all wiring.
                                                  7.    Carburetor out of adjustment.                                          7.    See “To Adjust Carburetor” in Service Adjustments  
                                                                                                                                                        section.
                                                  8.    Engine valves out of adjustment.                                     8.    Contact an authorized service center/department.

Engine will not turn over

        1.    Clutch/brake pedal not depressed.                                  1.    Depress clutch/brake pedal.

                                                  2.    Attachment clutch is engaged.                                        2.    Disengage attachment clutch.
                                                  3.    Weak or dead battery.                                                      3.    Recharge or replace battery.
                                                  4.    Blown fuse.                                                                      4.    Replace fuse.
                                                  5.    Corroded battery terminals.                                             5.    Clean battery terminals.
                                                  6.    Loose or damaged wiring.                                               6.    Check all wiring.
                                                  7.    Faulty ignition switch.                                                       7.    Check/replace ignition switch.
                                                  8.    Faulty solenoid or starter.                                                8.    Check/replace solenoid or starter.
                                                  9.    Faulty operator presence switch(es).                               9.    Contact an authorized service center/department.

Engine clicks but will not 

      1.    Weak or dead battery.                                                      1.    Recharge or replace battery.

start

                                          2.    Corroded battery terminals.                                             2.    Clean battery terminals.

                                                  3.    Loose or damaged wiring.                                               3.    Check all wiring.
                                                  4.    Faulty solenoid or starter.                                                4.    Check/replace solenoid or starter.

Loss of power                         

1.    Cutting too much grass/too fast.                                      1.    Raise cutting height/reduce speed.

                                                  2.    Throttle in “CHOKE” position.                                          2.    Adjust throttle control.
                                                  3.    Build-up of grass, leaves and trash under mower.           3.    Clean underside of mower housing.
                                                  4.    Dirty air fi lter.                                                                   4.    Clean/replace air fi lter.
                                                  5.    Low oil level/dirty oil.                                                        5.    Check oil level/change oil.
                                                  6.    Faulty spark plug.                                                            6.    Clean and regap or change spark plug.
                                                  7.    Dirty fuel fi lter.                                                                  7.    Replace fuel fi lter.
                                                  8.    Stale or dirty fuel.                                                            8.    Empty fuel tank and refi ll tank with fresh, clean gasoline.
                                                  9.    Water in fuel.                                                                    9.    Empty fuel tank and carburetor, refi ll tank with fresh  
                                                                                                                                                        gasoline and replace fuel fi lter.
                                                10.    Spark plug wire loose.                                                   10.    Connect and tighten spark plug wire.
                                                11.    Dirty engine air screen/fi ns.                                           11.    Clean engine air screen/fi ns.
                                                12.    Dirty/clogged muffl er.                                                     12.    Clean/replace muffl er.
                                                13.    Loose or damaged wiring.                                             13.    Check all wiring.
                                                14.    Carburetor out of adjustment.                                        14.    See “To Adjust Carburetor” in Service Adjustments  
                                                                                                                                                        section.
                                                15.    Engine valves out of adjustment.                                   15.    Contact an authorized service center/department.

Excessive vibration

                1.    Worn, bent or loose blade.                                               1.    Replace blade.  Tighten blade bolt.

                                                  2.    Bent blade mandrel.                                                        2.    Replace blade mandrel.
                                                  3.    Loose/damaged part(s).                                                  3.    Tighten loose part(s).  Replace damaged parts.

PROBLEM 

             CAUSE 

 

 

 

 

 

CORRECTION 

Содержание 188695













































Отзывы:

Нет отзывов

Похожие инструкции для 188695

H&S 3210 Operator'S Manual preview
3210
Бренд: H&S Страницы: 32
Dixie Chopper Pursuit 1832S Safety, Operation And Maintenance Manual preview
Pursuit 1832S
Бренд: Dixie Chopper Страницы: 52
Rally RE1338A Assembly/Repair Parts Manual preview
RE1338A
Бренд: Rally Страницы: 28
CanyCom CM1801 Operator'S Manual preview
CM1801
Бренд: CanyCom Страницы: 59
Bad Boy 48031001 Operator'S Manual preview
48031001
Бренд: Bad Boy Страницы: 20
HUSTLER Raptor 42 Operator'S Manual preview
Raptor 42
Бренд: HUSTLER Страницы: 40
Gardena PowerMax Li-37 Operator'S Manual preview
PowerMax Li-37
Бренд: Gardena Страницы: 18
Poulan Pro P160RWD Operator'S Manual preview
P160RWD
Бренд: Poulan Pro Страницы: 28
Cub Cadet GT 2544 Operator'S Manual preview
GT 2544
Бренд: Cub Cadet Страницы: 48
MTD 344 Series Operator'S Manual preview
344 Series
Бренд: MTD Страницы: 36
Poulan Pro BB185H42YT Operator'S Manual preview
BB185H42YT
Бренд: Poulan Pro Страницы: 30
Gravely 991128 Operator'S Manual preview
991128
Бренд: Gravely Страницы: 54
Bushranger 53TBU65 Assembly And Owner'S Manual preview
53TBU65
Бренд: Bushranger Страницы: 20
Craftsman 917.388950 Owner'S Manual preview
917.388950
Бренд: Craftsman Страницы: 40
Craftsman 917.388942 Owner'S Manual preview
917.388942
Бренд: Craftsman Страницы: 40
Craftsman 917.388940 Owner'S Manual preview
917.388940
Бренд: Craftsman Страницы: 40
Craftsman 917.388934 Owner'S Manual preview
917.388934
Бренд: Craftsman Страницы: 40
Craftsman 917.388933 Owner'S Manual preview
917.388933
Бренд: Craftsman Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды