background image

31

REPAIR PARTS

                     SNOW THROWER - MODEL NUMBER 

P10530ESA

WHEELS / DECALS

KEY   PART 
NO.    NO. 

DESCRIPTION

   1    178834            Wheel Assembly (16” Power Steer)
   2    155443            Pin, Klik  1/4
   3    181843            Cover, Power Steering
   4    17541008        Screw, Hex Head  #10-24 x 1/2
   5    73800500        Nut, Lock  5/16-18
   6    155415            Washer, Flat  5/16
   7    71210616        Screw, Hex Head  3/8-16 x 1
   8    182064X479    Bracket, Steer Cable RH
   9    182044X479    Bracket, Steer Cable LH

10    150078            Screw, Hex Head  5/16-18 x 3/4
11    17490508        Screw, Hex Head  5/16-18 x 1/2
12    184393            Link, Steering Lever
13    184288X479    Lever Assembly, Steering
14    182015            Pin, Steering Lever
15    184361            Bellcrank Assembly
16    181982            Bracket Assembly, LH Steering
17    182063            Bracket Assembly, RH Steering
18    181847            Pin, Steering Bellcrank
19    85179              Retainer, Hairpin
20    179148X479    Bracket, Lever Assembly
21    179141            Driver, Wheel
22    182466            Ring, Wire Retainer
23    179136            Lobe, Wheel
24    179138            Slide, Clutch
25    179139            Spring, Clutch Slide
26    179137            Lobe, Axle
27    178879            Key, Square  1/4
28    174697            Washer, Thrust (1”)
29    179830            Bearing, Axle
30    182226            Spring, Return
31    4802                Washer, Flat
32    700279            Clip, Retainer
33    12000045        Ring, Retaining

KEY   PART 
NO.    NO. 

DESCRIPTION

   1    181037            Decal, Danger
   2    183882            Decal, Poulan, 10.5HP/30”
   3    181035            Decal, Danger, Defl ector
   4    181042            Decal, Danger
   5    183879            Decal, Poulan
   6    181033            Decal, Instruction
   7    155798            Decal, Traction Lever
   8    155800            Decal, Auger Lever
   9    181039            Decal, Speed Control

10    183730            Decal, Remote Defl ector
11    183907            Decal, LH Trigger
12    183905            Decal, RH Trigger

  - -    185136            Owner’s Manual (English)
  - -    185137            Owner’s Manual (French)

NOTE:

  All component dimensions given in U.S. inches

             1 inch = 25.4 mm

Содержание 185136

































Отзывы: