background image

9

MODELS WITH ENGINE MOUNTED 
SPEED CONTROL
The engine speed is controlled by a lever 
located at the carburetor on the engine.  
HIGH or FAST position is for starting 
en gine, normal cutting and better grass 
bag ging.  LOW or SLOW position is for 
light cutting, trimming and fuel economy.

BRIGGS & STRATTON CLASSIC or SPRINT

ENGINE MOUNTED SPEED CONTROL

BRIGGS & STRATTON QUANTUM

ENGINE MOUNTED SPEED CONTROL

Remote 

throttle 

control

FAST

SLOW

CHOKE 
(START)

TECUMSEH

ENGINE MOUNTED SPEED CONTROL

OPERATION

The operation of any lawn 
mower can result in foreign 
objects thrown into the 
eyes, which can result in 
severe eye damage. Always 

wear safety glasses or eye shields while 
operating your lawn mower or performing 
any ad just ments or repairs. We recom-
mend standard safety glasses or a wide 
vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED CONTROL

MODELS WITH REMOTE THROTTLE
Engine speed is con trolled by the throttle 
control located on the upper handle. 
•   Move lever forward to FAST engine 

speed for start ing and better bagging.  

•   Move lever backward for SLOW engine 

speed.

•   Some models have engines equipped 

with a choke feature.  Move the lever all 
the way forward to the CHOKE position 
when starting a cold engine.

Primer (if equipped)

Engine speed 
control lever

Engine speed control lever

Primer (if

equipped)

Spark 

plug

Engine 

speed 

control lever

Primer (if equipped)

MODELS WITH FIXED SPEED ENGINES
Engine speed was set at the factory for 
optimum per form ance.  Engine speed is 
not adjustable.  

 

Содержание 172787





























Отзывы: