Poulan Pro 115275026, Инструкция по эксплуатации

Страница: 4 / 21

4
OPTIONAL ATTACHMENTS
Cutting attachment / guard,
Powerhead model Attachments Type part. no.
Trimmer head TNG 7 537419214 / 545071802
Brushcutter attachment PP4000C 952711610
Attachments Type Part. no.
Edger attachment PP1000E 952711607
Cultivator attachment PP2000T 952711608
Blower attachment PP3000B 952711609
Pruner attachment PP5000P 952711612
Pruner attachment PP5500P 952711672
These attachments used in combination with the specified powerhead have been evaluated
to applicable ISO-- and EN safety requirement standards by the Swedish Machinery Testing
Institute:
These attachments used in combination with the specified powerhead have been evaluated
to ANSI B175.3--2003, “Grass Trimmers and Brushcutters -- Safety Requirements”. These
combinations have been evaluated by Underwriter’s Laboratories Inc. (UL) and are conse-
quently UL listed:
PP25E
SAFETY RULES
WARNING:
When using gardening
appliances, basic safety precautions must al-
ways be followed to reduce the risk of fire and
serious injury. Read and follow all instructions.
This power unit can be dangerous! Operator is
responsible for following instructions and warn-
ings on unit and in manual. Read entire instruc-
tion manual before using unit! Be thoroughly fa-
miliar with the controls and the proper use of the
unit. Restrict the use of this unit to persons who
have read, understand, and will follow the
instructions and warnings on the unit and in the
manual. Never allow children to operate this
unit.
SAFETY INFORMATION
ON THE UNIT
INSTRUCTION
MANUAL
DANGER:
Never use blades with line
trimmer attachment. Never use flailing de-
vices with any attachment. This unit (when
used with supplied line trimmer attachment) is
designed for line trimmer use only. Use of any
other accessories with line trimmer attach-
ment will increase the risk of injury.
If situations occur which are not covered in
this manual, use care and good judgment. If
you need assistance, contact your authorized
service dealer or call 1-800-554-6723.
OPERATOR SAFETY
S
Dress properly. Always wear safety
glasses or similar eye protection when op-
erating, or performing maintenance, on
your unit (safety glasses are available).
Eye protection should be marked Z87.
S
Always wear face or dust mask if operation
is dusty.
S
Always wear heavy, long pants, long
sleeves, boots, and gloves. Wearing safety
leg guards is recommended.
S
Always wear foot protection. Do not go
barefoot or wear sandals. Stay clear of
spinning line.
S
Secure hair above shoulder length. Secure
or remove loose clothing or clothing with
loosely hanging ties, straps, tassels, etc.
They can be caught in moving parts.
S
Being fully covered also helps protect you
from debris and pieces of toxic plants
thrown by spinning line.
S
Stay Alert. Do not operate this unit when you
are tired, ill, upset or under the influence of al-
cohol, drugs, or medication. Watch what you
are doing; use common sense.
S
Wear hearing protection.
S
Never start or run inside a closed room or
building. Breathing exhaust fumes can kill.
S
Keep handles free of oil and fuel.
S
Always keep engine on the right hand side
of your body.
S
Hold the unit firmly with both hands.
S
Keep cutting attachment below waist level
and away from all parts of your body. Do
not raise engine above your waist.
S
Keep all parts of your body away from muf-
fler and spinning line (or other optional at-
tachment). A hot muffler can cause serious
burns.
S
Keep firm footing and balance. Do not over-
reach or use from unstable surfaces such as
ladders, trees, steep slopes, rooftops, etc.
S
Use only in daylight or good artificial light.