Poulan Pro 115224926 Скачать руководство пользователя страница 25

Страница: 25 / 25

small off--road engine to an Poulan PRO autho-

rized repair center as soon as a problem exists.

Warranty repairs should be completed in a rea-

sonable amount of time, not to exceed 30 days.

If you have any questions regarding your war-

ranty rights and responsibilities, you should

contact your nearest authorized service center,

call Poulan PRO at 1--800--554--6723, or send

e-mail correspondence to emission.warranty

@HCOP--emission.com.

WARRANTY COMMENCEMENT DATE:

The warranty period begins on the date the

small off--road engine

purchased.

LENGTH OF COVERAGE:

This warranty

shall be for a period of two years from the ini-

tial date of purchase.

WHAT IS COVERED:

REPAIR OR REPLACEMENT OF PARTS.

Repair or replacement of any warranted part

will be performed at no charge to the owner at

an approved Poulan PRO servicing center. If

you have any questions regarding your war-

ranty rights and responsibilities, you should

contact your nearest authorized service cen-

ter, call Poulan PRO at 1--800--554--6723, or

send e-mail correspondence to emission.

[email protected].

WARRANTY PERIOD:

Any warranted part

which is not scheduled for replacement as re-

quired maintenance, or which is scheduled

only for regular inspection to the effect of “re-

pair or replace as necessary” shall be war-

ranted for 2 years. Any warranted part which

is scheduled for replacement as required

maintenance shall be warranted for the period

of time up to the first scheduled replacement

point for that part.

DIAGNOSIS:

The owner

shall not be charged for diagnostic labor

which leads to the determination that a war-

ranted part is defective if the diagnostic work

is performed at an approved Poulan PRO

servicing center.

CONSEQUENTIAL DAMAGES:

Poulan

PRO may be liable for damages to other en-

gine components caused by the failure of a

warranted part still under warranty.

WHAT IS

NOT COVERED

: All failures caused by

abuse, neglect, or improper maintenance are

not covered.

ADD--ON OR MODIFIED

PARTS:

The use of add--on or modified parts

can be grounds for disallowing a warranty

claim. Poulan PRO is not liable to cover failures

of warranted parts caused by the use of add--on

or modified parts.

HOW TO FILE A CLAIM:

you have any questions regarding your warran-

ty rights and responsibilities, you should contact

your nearest authorized service center, call

Poulan PRO at 1--800--554--6723, or send

e-mail correspondence to emission.warranty

@HCOP--emission. com.

WHERE TO GET

WARRANTY SERVICE:

Warranty services or

repairs shall be provided at all Poulan PRO

service centers. Call: 1--800--554--6723 or

send e-mail correspondence to emission.

[email protected].

MAINTE-

NANCE, REPLACEMENT AND REPAIR

OF EMISSION RELATED PARTS

: Any Pou-

lan PRO approved replacement part used in

the performance of any warranty mainte-

nance or repair on emission related parts will

be provided without charge to the owner if the

part is under warranty.

EMISSION CON-

TROL WARRANTY PARTS LIST:

Carbure-

tor, air filter (covered up to maintenance sched-

ule), ignition system: spark plug (covered up to

maintenance schedule), ignition module, muffler

including catalyst (if equipped), fuel tank.

MAINTENANCE STATEMENT:

The owner is

responsible for the performance of all re-

quired maintenance as defined in the instruc-

tion manual.

The information on the product label indicates which standard your engine is certified.

Example: (Year) EPA and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)

Intermediate (125 hours)

Extended (300 hours)

Содержание 115224926


























Результаты поиска

Содержание 115224926

Отзывы:

Бренды по названию

Популярные бренды

Poulan Pro 115224926, Инструкция по эксплуатации

Результаты поиска

Содержание 115224926

Отзывы:

Бренды по названию

Популярные бренды