Pottinger NOVADISC 640, Руководство оператора, Страница: 18 / 43

0601-GB WARTUNG_3904
GB
MAINTENANCE AND SERVICE
- 18 -
Angular gear oil level check
- Change oil after the first 50 operating hours.
Under normal operating conditions, oil is to be
replenished annually (OIL LEVEL).
- Change oil after 300 ha at the latest.
Quantity:
0,95 lt. SAE 90
• Under normal operating conditions, oil is to be
replenished annually.
1. Lift one side of the mower bar (X1) and
support.
NOVADISC 730:
X1 = 48,0
ÌÇ
NOVADISC 900: X1 = 19,0
ÌÇ
• The side where the oil refill screw is located remains
on the ground.
• Lift the other side of the mower bar about
X1
and
support with a suitable prop.
2. Let mower bar stand in this position for some
15 minutes.
• This time is necessary to allow the oil to gather in
the lower area of the mower bar.
3. Remove oil refill screw (63).
The oil level is measured at the oil refill screw hole.
Important!
In doing so the cutter bar must be in horizontal position.
- Take out oil filler plug (63) and top up oil "SAE 90" up
to the level screw
1)
.
4. Oil level check
The oil level is correct when the oil comes up to the
level screw
1)
(OIL LEVEL).
• Too much oil leads to the mower bar
overheating during operation.
• Too little oil does not guarantee the
necessary lubrication
1) The oil filler plug (63) is also the level screw (OIL LEVEL)
Cutter bar oil level check
Safety
hints:
• Turn engine off
when adjustment,
service and repair
work is to be
done.
• Do not work
under the
machine without
safe support.