Page
6
/
6
14. Secure the runners with 4 Thumb Screws with Washer (K) by turning counter clockwise from the underside of
the table top, as seen in the illustration below.
15. If the Table does
n’t sit level, adjust the levelers under legs.
16. Assembly is complete.
Care Instructions:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog | www.potterybarn.com
Thumb Screws will need to go through the runner
and insert into the nut which is pre-assembled on the
underside of top.
Pre-attached metal plate
At the bottom side of table top
