Oval Lattice Recessed Medicine Cabinet
Page
2
of
3
3. After the appropriate stud cutting and framing has been done, insert the cabinet (A) into the recess and ensure that it
fits snugly and is true. Adjust and shim as necessary and make sure that the outer molding of cabinet (A) lies flush
against the wall surface.
4. While holding the cabinet (A) firmly in the recess, insert mounting screws (c) into the holes located along the inside
side panels of the cabinet (A). Using a Phillips head screwdriver, screw each of the toggle screws (c) into the adjacent
wall studs or wood support structure until tight.
Note: Cabinet cannot be rotated to adjust door opening direction.
Assembly Instructions:
1.
To install the shelf: insert the shelf pin (a) into the pre-drilled holes on the interior side of the wooden cabinet (A)
to set each shelf at a desired level – FOUR per shelf. Once all four shelf pins (a) are in position, gently lay
the glass shelf (B) onto the shelf pin (a). Repeat for the other shelf. See
Figure 2
2.
Attach the rubber pads (b) over the magnet in the wooden cabinet (A) (Optional). See
Figure 2
Figure 1
c
