Page
2
of
2
Dry Wall Mounting
1.
Use a Phillips screwdriver to insert the wall anchors (b)
. Do not “push” or drive the anchors
(b) into the wall, it is designed to bore into the wall like a drill bit. Slowly turn the anchors (b)
clockwise while applying pressure until the flange just touches the wall.
2.
Insert the metal screw (a) into the wall anchor (b) turning clockwise leaving approximately
½” between the back of the screw head and the wall.
3.
Align the d-rings over the screw heads and slide the mirror (A) down until the tops of the d-
rings rest on the screws. Tighten or loosen screws as needed to fit the mirror snugly against
the wall.
Care Instructions:
Dust with a clean, soft damp cloth and wipe dry immediately.
Avoid the use of chemicals and harsh cleaning agents.
thank you for your purchase
stores | catalog | www.potterybarn.com
b
a
A
