Page
4
of
5
5. Insert the Allen Bolts (J) through the holes on the metal bracket on the Side Legs (D) into the inserts on the Top
Panel (A), tighten with the Allen Key (M) as shown in
fig. 4, illustration. 5.
6. Insert the Allen Bolts (L) through the holes on the Apron (B) into the inserts on the Top Panel (A), tighten with the
Allen Key (M) as shown in
fig. 4, illustration. 5.
IIllustration. 4
Fig. 4
IIllustration. 5
7. If the floor is uneven, adjust the levelers found on the bottom of the furniture as shown in
fig. 5 illustration. 6.
•
Carefully grasp one side of the furniture and elevate it slightly to provide access to levelers.
•
Turn the leveler until adequate contact will be made with the floor.
•
Carefully set the furniture down.
•
Repeat until the furniture sits level and stable.
Fig. 5 Illustration. 6
A
