4.
Put the marble top (D) upside down on carpeted or scratch-free surface., put the sink(E) in place. insert the metal
bolt ( I ) with spring washers(H) and nut(G) into the pre-drilled hole under the backside of marble top and attach the
sink to marble top by using the L contacted plane(J) , spring washers (H), and nuts (G)., tighten the nut deasily. with
the enclosed wrench (K). (See Fig.2.)
5. Repeat step 4 for the remaining metal bolts(D).
6. Turn the marble top up and put it on the console.. Then put the splash on the place of marble top and glue it..(See
fig.3)
7. Assembly is completed.
Fig.2
G
H
I
K
G
H
K
J
D
E
E
D
E
E
D
F
Fig.3
