Harvest Sink console double
Assembly instruction
•
Please read all instructions before beginning assembly.
•
For your safety and convenience, assembly by two people is recommended.
•
Use the parts and hardware lists to identify and separate each of the component included.
•
Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or
hardware.
Parts Included (Box 1):
•
(1) Console (A)
•
(4) Legs (B)
•
(1)Middle leg (C)
•
(1)Marble top (D)
•
(2) Sink (E)
•
(1) Marble splash(F)
Assembly instructions:
1. Carefully place the console (A) upside down on carpeted or scratch-free surface.
2. Insert the bolt of leg(B) into the pre-drilled post, tighten them deasily . Repeat the step for the remaining legs.
3. Then insert the bolt of middle leg(C) into the pre-drilled rail in the middle of console and tighten it deasily. (See
Fig.1.).
Fig. 1
B
A
B
B
B
Hardware Included (Box 1):
•
(16) Nuts: diam 8mm (G)
•
(16) Spring washers: diam 8mm (H)
•
(8)bolt: diam 8mm (I)
•
(8) L contacted plane(J)
•
(1) Wrench (K)
