Pottery Barn Trigger Lift Cantilever umbrella Скачать руководство пользователя страница 2

Step 4
To rotate the umbrella,you must be using
an umbrella base with a 360 ro tation feature.
You would simply step on the p edal
and rotate to the desired posi tion.

Step 5
To tilt the umbrella you would squeeze the
trigger and bring down the umb rella to one
of the 3 holes for tilting.

Step 6
To close the umbrella , squeez e the Trigger
again and bring down to the fi rst or second
position . Crank the umbrella counter clockwise
to close .
Re-Squeeze the trigger and bri ng all the way
down .

Thank you for your purchase

Stores/ catalog/ www. potterybar n.com

Care Instructions

· rush to remove dirt and dust
· For spot cleaning , sponge lig htly with

a solution of mild soap and wa rm water.

Storage instructions

· Store in a dry, covered area whe n not in use
· To prevent mildew, be sure the umbrella fabric is completely

dry before storing. Store indo ors when not in use or during
periods of of inclement weathe r.

· Cover during storage or when n ot in use using a proper

outdoor protective cover allow ing adequate ventilationwithout
trapping moisture .

· Do not cover with plastic or s imilar materials that will trap

moisture. Pottery Barn umbrell a covers are vented and can
be used.

Содержание Trigger Lift Cantilever umbrella

Страница 1: ...e handle clockwise to open your umbrella Step 3 Once your umbrella has been opened you can now squeeze the trigger and push up to the highest position The fully open position will have the canopy parallel to the ground WARNING Do not crank in counter clockwise direction as the umbrella will go up but not hold and suddenly will come down WARNING Do not leave your in the open position during wind or...

Страница 2: ...way down Thank you for your purchase Stores catalog www potterybarn com Care Instructions rush to remove dirt and dust For spot cleaning sponge lightly with a solution of mild soap and warm water Storage instructions Store in a dry covered area when not in use To prevent mildew be sure the umbrella fabric is completely dry before storing Store indoors when not in use or during periods of of inclem...

Страница 3: ...otation mechanism C and secure to the steel plates with steel bolts c of M8X30mm by wrench 6mm Do not tighten the bolt until all 4 bolts are attached 3 Attach on the stem F and secure with steel bolts d M8X13mm by wrench 5mm Do not tighten the bolt until all 4 bolts are attached 4 Insert the cover B to the stem then put on the 4 Tiles G 5 Insert the cover ring A to the bottom of umbrella pole firs...

Страница 4: ...s catalog 1 Place umbrella frame on flat work area Unscrew Finial from top of umbrella frame Place Canopy over umbrella frame Fig 1 2 One hand holds rib while one hand pulling pocket to set each Rib End into each pocket Fig 2 1 2 2 NOTE For Rectangular canopies only Insert the Longest corner rib into pocket first then continue to insert the ribs into all remaining pockets 3 Secure Finial back to t...

Отзывы: