Page
3
of
5
2.
Carefully lift up the marble top (B) with basin attached to place it onto the console base (D). Let the marble top lies flatly on
top of the console base (D). Fig.2
Caution: For safe handling, 2-3 people are recommended.
Adjust the basin position to make sure drain holes are right on top of the cut-out for drainpipe on the shelf. Now secure the
basin tightly.
Avoid moving the top after it has been set into place. Allow the top to dry a minimum of 24 hours to allow for proper
adhesion to the console.
3.
Use high quality silicone or acrylic based bath sealant to install back splash (C) in place (
Fig.3
), clean up any excess
immediately with a clean damp rag.
DO NOT USE PLUMBERS PUTTY OR ANY OIL BASED SEALANT AS THIS
WILL STAIN THE MARBLE.
Wipe off any excess wax or residue that may have accumulated around sink area.
Caution: Do not allow children to stand on lower shelf or drawer.
Fig. 2
Fig. 3
