Date: 21-October-2011 Page 7/7
Rev:
9. Turn the pre-installed mending plate under the horizontal rail of long and short guard rail (4&5) over the side rail (3).
Secure the mending plate with side rail (3) by medium screws (F).
(F)
(5x)
Optional the assembly for single bed Full
– Full size used:
10. Release the ladder (6) from the bunk bed then remove the upper bed from the lower bed.
11. Release the guard rail (4&5) from the upper bed.
12. Release one panel of the lower bed.
13. Release one panel of the upper bed.
14. Assemble the panel of the lower bed (that was released on point no 12) to the upper bed. The panel of lower bed will be as
the headboard.
15. Assemble the panel of the upper bed (that was released on point no 13) to the lower bed. The panel of lower bed will be as
the headboard.
16. Release the wood blocks with the hole and then attach the wood blocks without hole to the headboard.
.
Thank you for your purchase
stores | catalog |
www.pbteen.com
USA 1.800.290.8181
CARE INSTRUCTIONS:
Dust often using a clean, soft, dry lint-free cloth.
Blot spills immediately, and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish.
Check fasteners periodically for tightness.
Do not over tighten.
This may cause distortion of breakage.
Parents should ensure a safe environment for the child by checking regularly, before placing the child
on the product, that every component is properly and securely in place.
5x