Date: 2014-November-12
Rev:
Page 5/6
6.
With the help of another adult, carefully turn the crib and place it on a scratch-free surface. Unscrew the 2 Bolts (D)
to detach the Mattress Base from Front Gate (PART 2). Remove Front Gate (PART 2) from the Crib by unscrewing
the 4 Bolts (C) at top and bottom with Allen key (A), as shown in the illustration below.
7.
Attach the assembled Conversion Kit to the Left/Right End Panel (PART 3 & 4) using the original 4 Bolts (C) and
tighten with Allen Key (A). Do not fully tighten bolts (C) at this point. Then fix the two brackets of the Mattress Base
to the Conversion Kit using the original 2 Bolts (D) and tighten with Allen Key (A), as shown in the illustration
below.
(C)
(A)
(D)
(C)
(A)
(D)
C
2
x
4x
D
4
x
2x
2x
4x
2x
C
2
x
4x
D
4
x
2x
4x
