POTILA MASTER 500, Руководство по эксплуатации

Страница: 23 / 35

23
5. MAINTENANCE
Observe the safety guidelines specified in Section 2 when performing maintenance.
- Shut down the tractor before performing any maintenance procedures.
- Support the cultivator with jack stands when performing maintenance.
- Do not stay on the cultivator.
Key values
Tyre pressures: 200/60-14.5 6 bar
250/65-14.5 4.4 bar
340/55-16 4 bar
Tightening torque for the tines: 110 Nm
Tightening torque for the wheel bolts: 280 Nm
Tightening torque for the towing eye bolts: 210 Nm
Instructions
Check the following after the first day of operation:
•
mounting of the tines
•
tightening torque of the wheel bolts
•
clearance of the wheel and bogie bearings
•
tightening torque of the lock nuts of the cylinder
end pieces.
Weekly maintenance:
•
Check the mounting of the tines and wheels.
•
Lubricate the hinges of the wing sections.
•
Lubricate the slide bearings of the transport axle.
•
Lubricate the joints of the wing section wheels.
•
Check for oil leaks / signs of abrasion on hoses.
•
Check the calibration of the working depth indicator.
•
Check the condition of the draw bar assembly
(towing eye, draw bar, bolts).
After the season:
•
Clean the cultivator.
•
Lubricate all nipples.
•
Check the clearance of all bearings and
adjust if necessary.
•
Check the condition of consumable parts
and replace/reverse if necessary.
•
Check the tightening torque of the lock nuts
of the cylinder end pieces.