Potek BC0401 Скачать руководство пользователя страница 3

A.  Connect the Charger to Ba�ery

INSTRUCTION MANUAL

RISK OF EXPLOSIVE GASES.

WARNING: Explosion and Fire Hazard 

Ensure that the cable does not jam or comes into contact with hot surfaces or sharp edges.

Connec�on to the mains supply must be in accordance with the na�onal regula�ons for electrical 

installa�ons.

a) WORKING IN VICINITY OF ALEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLO-

SIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPOR-

TANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.
b) To reduce risk of ba�ery explosion, follow these instruc�ons and those published by ba�ery-

manufacturer and manufacturer of any equipment you intend to use in vicinity of ba�ery. Review 

cau�onary marking on these products and on engine.
Never charge a frozen ba�ery.
Never charge a damaged ba�ery.
Never allow red and black clamps to touch each other or another common metal conductor. This 

could create a sparking.
Make sure the area around the ba�ery and charger is well ven�lated. DO NOT use this product in 

anenclosed space. The internal ba�ery may vent explosive hydrogen gas, which can be ignited by 

sparks from electrical connec�ons.
DO NOT use this product where there are flammable fumes or gases, such as in the bilge of a 

gasoline-powered boat, or near propane tanks.
Never smoke or allow a spark or flame in vicinity of the engine or ba�eries.
Be careful not to drop a metal object on the ba�ery or allow a metal tool to simultaneously touch 

the posi�ve and nega�ve cable ends or ba�ery terminals. It might spark or short-circuit the ba�ery 

and cause an explosion.
If you need to remove the clip from the ba�ery terminal, ALWAYS remove the clip from the posi�ve 

terminal from the ba�ery first. Make sure all accessories are off so you don't cause an arc.
The  ba�ery  terminals  exposed  at  the  clamps  have  enough  energy  present  to  cause  a  spark, 

crea�ng an explosion hazard, or to cause burns if a metal object contacts both terminals. NEVER 

allow the red and black clips to touch each other or a common metal conductor.
DO NOT expose this product to water, rain, snow, condensa�on, or spray.
Never  allow  ba�ery  acid  to  drip  on  charger  when  reading  electrolyte  specific  gravity  or  filling 

ba�ery.

Содержание BC0401








Отзывы: