Enter/Exit Programming Mode
Scan this barcode to enter the set-up and exit after set-up finished.
Display firmware version
Reading of the “Display Firmware Version” will
show the current firmware version on host.
Return to PC/AT default
This barcode allows setting in keyboard wedge
interface for IBM PC AT/PS/2 and compatibles.
Return to RS-232 default
The RS-232C interface scanner is often used
when connecting to the serial port of a PC or
terminal, reading the barcode to set the scanner
into RS-232 interface.
Return to USB default
Reading of “Return to USB default” sets the
device into USB interface support.
** For more set-up selections, please refer to Programming Guide in the CD-ROM in the package.**
Important Notice
No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for a
particular purpose. We are not liable for any errors contained herein or incidental or consequential damages in connection with furnishing,
performance or use of this material.
Copyright © 2009. All rights reserved.
Laser Safety
The laser scanner complies with safety standard IEC 60825-1 for a Class I laser produce. It also complies with CDRH as applicable to a Class IIa
laser product.
Avoid long term staring into direct laser light.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
SM2450
QUICK GUIDE
