Keyboard wedge
Function Key:
Set Enable, scanner can output code as pressing function-key in your
application program while the barcode datas contain ASCII value between 0116 to 1F16.
Refer to ASCII table, page 71.
Numeric Key:
The Keypad has to be selected if your application program is only keypad
numeric code acceptable. So, scanner will output code as press numeric keypad when it
read numeric digit. (The keypad is in the right side of keyboard, and Num Lock control
key is also on.) If Alt+Keypad is selected, Caps Lock and output will be independent.
Caps Lock:
By selecting Caps Lock or No Caps Lock, scanner can get Caps Lock status.
Power-on simulation:
All of the PCs check the keyboard status during power-on selftest.
It is recommended to Enable function if you are working without keyboard installation. It
simulates keyboard timing and pass keyboard present status to the PC during power-on.
Inter-character delay:
This delay is inserted after each data characters transmitted. If
the transmission speed is too high, the system may not be able to receive all characters.
Adjust it and try out suited delay to make system work properly.
Block transmission delay:
It is a delay timer between barcode data output. The feature
is used to transfer continually with shorter barcode data or multi-field scanning.
