POSline SC2100B, Руководство по программированию

Страница: 7 / 36

Start Configuration
1.
Scan the barcode of “Continuous/Timeout OFF”
2. Scan 2 digits of the ASCII code of the Appendix A
3. Scan the “End” of the Appendix A
4. Scan the End Configuration to end the procedure
5. The settings unit is a second. Ex:0*40 stands for 1
minute
The Timeout Default is 0*B4, about 3 minutes
Trigger On/Off
Continuous/Trigger Off
Continuous/LED always On
Flash On
<Trigger On/Good read
off>
Testing
Continuous/Timeout Off
Continuous/No Trigger
2.5 Buzzer Set-up
You can pitch the buzzer tone and adjust the buzzer time.
Besides, you can set the voice of boot and decoding..
Frequency（Default：0AH）
Appendix A(00-10H)
Power On Tone
Adjust Buzzer
Tone（Default：05H）
Appendix A(00-10H)
End Configuration
7